How Interesting Bathroom Table Vanity Designs

Posted by in Bedroom Vanities - October 11, 2016
How Interesting Bathroom Table Vanity Designs

Bedroom Vanities - How Interesting Bathroom Table Vanity Designs

Table vanity. One of the most significant elements in the bathroom is vanity. Vanity is equipped conventional tub of porcelain with rectangular or oval mirror, and includes some of the drawers on it. But this time, you will find design inspiration and model of creative vanity that you can place in your bathroom. Vanity can be made even by making use goods - items that have been unused obsolete. Want to know more? Check the explanations below.

Create vanity of the old cabinet or chest of drawers

Black Wooden Vanity Table and Stool
Black Wooden Vanity Table and Stool

To get a bathroom vanity unconventional, look old wardrobe or chest of drawer of a garage sale or antique shop, and with a few modifications, made as a bathroom vanity. How to lay the cabinet is one corner of the bathroom and holes in the middle to put a hand washing sink or tub. Adjust the size of the holes made with tub that will be included. Then, on the back of the cupboard, little holes for the pipeline then connect the pipe to the sink. Drawer drawers that are still intact can be used to store towels, soap, toilet tissue, and other toiletries.

Old table of metal

Cool Dressing Table Designs Natural Wooden
Cool Dressing Table Designs Natural Wooden

Bathroom table vanity ideas are no less unique and slightly eccentric is the vanity of the old table made of metal. The trick is almost the same as the above, that knocked a hole in the table as a place to put the sink and another hole in the back for a pipeline. If the tub is mounted on the vanity correctly along with piping, you can make improvements on the vanity look paint it again, especially if the surface of rusty metal. But if you want a vanity impression that retro, classic, and older, let the color of the vanity as it is. Quite poles in some parts there is rust to be more subtle.

Time remaining wood

Remains of wood, both obtained from the rest of sawmill and the rest of the demolished houses, can be compiled and made into a bathroom vanity, of course, with a touch of creativity. Begin by measuring how distance vanity with bathroom floor to be made, by adjusting its height so that they will be easy to take advantage of vanity. In addition to higher dimensions, the width dimension should also be specified. After all the pre-determined size, start making vanity of wood - the wood. Use nails, tacks, thumbtacks, until the wood glue to glue between the wood with other wood.

Vanity of unused kitchen cabinet

Want more extreme vanity ideas? You can use a kitchen cabinet is modified into attractive bathroom vanity. First, measure and adjust the kitchen cabinet with dimensions of height, length, and width of vanity that we wanted. Typically, the size of a standard vanity height is 31 to 35 inches, or about 75cm to 85 cm. If there is excess, reduce by trimming on either side with a circular cutting motion. If the cabinet has a back side, consider omitting the back side with a hammer to be used as a pipeline.

Then, attach the countertop and tub on the upper surface. If the kitchen cabinets have drawers drawer that interfere with the position of the tub, should be released and replaced its position on the loose side. The drawers are useful for storing bathroom equipment as table vanity. Now after all is installed properly, clean and grind and clean the surface of the cabinet, especially on the remains of trimming.