Flat screen TV with proper installation. Attaching a flat screen TV on the wall is an aesthetic activity that you will surely enjoy. The emergence of flat-screen TVs, HD TVs, and plasma TV has caused more and more people are now beginning to attach the TV to their walls. Even it is relatively easy and inexpensive way to do it. Solid wall sticker can be purchased for only $ 50 or 60 dollars. Read More detailed guide below to understand how to attach the TV to the wall.
Fastener (aka bracket) with the right size can be purchased on the internet and in electronic retail stores. Every major electronics retailers have this binder. Generally, the binder has a variety of sizes. This means you can buy a suitable binder for some TV. Remove the TV board if installed. If the board is not already installed TV when you open the box, do not be installed because you have to keep it off later.
Lay the front of the TV on a soft surface, soft and flat. If you are hesitant plasma TV placed on a carpet or floor, read the owner's manual as a guide. Some manufacturers recommend a flat-screen plasma screen facing upward when attaching fastener.
Find the four holes in the rear of the flat screen TV. This is a hole for attaching a binder. Perhaps there are three types of holes for pasting. Both small fasteners will be attached to the TV. Enter the fastener to the back of the TV. Align fastener as stated in the manual installation. Ensure that the fastener facing the right direction when attached to a TV.
Use a screwdriver to tighten the remaining bolts. The binder should be firmly plugged into the TV without moving. You may need to install an existing ring binder together to ensure the binding is secure. Look framework (aka stud) on the wall. Mark the center frame on the wall. The standard framework has a width of 1.5 inches (after drying and cutting board cover rugged 2 "x 4"). If you hang a flat screen instead of on the frame, the TV may fall and broken from dry wall, and make a wall damaged.
By using the leveler with mark the frame with a pencil. You have to make sure the installation is fitted and flat, so take a little time before you paste to make sure that the TV is installed will be interesting. Drill holes drilled earlier in accordance with the pattern behind fastener. Initial hole should be slightly smaller than the bolts to be drilled into it. All you do is making it easy bolt to enter.
Attaching the flat screen TV on a wall outlet will help, so you do not need to install a new outlet. A metal coat hanger can be used to direct the cable through the hole. To hide your cables have to cut a hole in the back of the TV and attach at the bottom of the wall. TV power cord will not affect the image. The easiest way to find the order is with the search order.